Most Windows 10 and 11 startup problems are caused by a failed update, a bad driver or damaged boot files, and many can be fixed from Windows' own recovery tools without losing anything. Work through these steps in order. Stop at step 1 if anything suggests the hardware is failing.
1. Rule out failing hardware first
Stop and get help if: the PC makes clicking or grinding noises, the drive doesn't appear in the BIOS or UEFI setup, or you see messages such as "no bootable device" after a drop or spill. Repair tools put extra strain on a failing drive and can make data recovery harder.
Also check the simple things: unplug USB drives, memory cards and docks, then try again. Windows sometimes tries to start from an external drive.
2. Do a full power cycle
- Desktop: shut down, switch off at the wall, wait 30 seconds, then start again.
- Laptop: unplug the charger, then hold the power button for 15 to 30 seconds before starting again.
3. Open the Windows recovery environment
Most of the fixes below live in the recovery environment (WinRE). Any of these opens it:
- Automatic: if Windows fails to start twice in a row, it usually opens Automatic Repair on the third attempt. You can force this by switching the PC off with the power button while the Windows logo is showing, three times.
- From the sign-in screen: hold Shift and click Power, then Restart.
- From a USB installer: start from a Windows installation USB, choose your language, then click "Repair your computer".
Then choose Troubleshoot > Advanced options. All the steps below start from there.
4. If it asks for a BitLocker recovery key
Many newer laptops encrypt the drive automatically. If you see a blue BitLocker screen asking for a 48-digit key, don't reset or reinstall. Sign in to your Microsoft account on another device at aka.ms/myrecoverykey to find it. On a work computer, ask your IT team. Without the key, the data on an encrypted drive can't be recovered.
5. Run Startup Repair
Choose Startup Repair. It scans for common boot problems and fixes what it can automatically. It can take a while. If it says it couldn't repair your PC, move on.
6. Uninstall the latest update
If the problem started right after Windows updated, choose Uninstall Updates. Start with the latest quality update. If that doesn't help, try the latest feature update. Your files aren't affected.
7. Use System Restore
Choose System Restore and pick a restore point from before the problem started. It undoes recent changes to drivers, updates and settings, without touching your documents and photos. It only works if restore points exist.
8. Start in Safe Mode
Choose Startup Settings > Restart, then press 4 for Safe Mode, or 5 for Safe Mode with Networking. Safe Mode loads only basic drivers. If Windows starts there, a driver or startup program is the likely cause. In Safe Mode you can:
- roll back or uninstall a recently updated driver in Device Manager
- uninstall recently installed software
- copy your important files to a USB drive while you can
9. Command Prompt checks (advanced)
Choose Command Prompt. In the recovery environment, your Windows drive often isn't C:. Find it first by checking which drive letter has a Windows folder:
dir C:\
dir D:\
Repair system files offline, replacing C: with your Windows drive letter:
sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows
Check the file system for errors:
chkdsk C: /f
Don't run CHKDSK on a drive you suspect is failing (see step 1). Back up first if you can.
10. Rebuild the boot files (UEFI PCs)
If Windows itself is intact but the boot files are damaged, you can recreate them. Most PCs from the last ten years use UEFI. This is where people most often make things worse, so read each line before typing it.
- Type
diskpart, thenlist vol. Find the small FAT32 volume of about 100 to 500 MB. That's the EFI system partition. - Type
sel vol 2, replacing 2 with its number, thenassign letter=S, thenexit. - Rebuild the boot files, using your Windows drive letter:
bcdboot C:\Windows /s S: /f UEFI
Close the Command Prompt, choose Continue and see if Windows starts. Older guides suggest bootrec /fixboot, which often fails with "Access is denied" on UEFI PCs. bcdboot is the reliable route.
11. Last resort: keep your files and reinstall
If nothing works and the drive is healthy, Troubleshoot > Reset this PC > Keep my files reinstalls Windows while keeping your personal files, but removes your apps. Copy your files somewhere safe first if there's any way to.
When to ask for help
Ask for help if any of the hardware warning signs appear, if you see a BitLocker screen and can't find your key, or if you're not comfortable typing commands. A wrong command at step 10 can make things harder to fix.
Questions
Will these steps delete my files?
Steps 2 to 10 don't delete personal files. Reset this PC with Keep my files keeps your files but removes apps. Any repair on a failing drive carries a risk, so back up first when you can.
Why does Automatic Repair keep looping?
Usually because the cause is something it can't fix by itself, such as a bad driver or update. Go to Advanced options and try uninstalling updates, System Restore or Safe Mode instead.
How do I know if my PC uses UEFI?
Almost every PC sold with Windows 10 or 11 does. In diskpart, a small FAT32 volume labelled System or EFI confirms it.
Stuck? I'll guide you live
Windows won't start, so remote tools can't connect. We do it on a WhatsApp video call instead: you point your phone at the screen and I guide each step. Boot and OS recovery is LKR 7,500$30, and you pay only the diagnostic fee if I can't fix it.
Get help with my PC